CHALLENGES FOR CONSTRUCTION PROJECTS
High-precision levelling is very important for modern construction sites. An even, smooth surface is crucial for the quality of the overall project. For this reason, construction sites and their processes are getting more and more complex. The requirements on the worksite management are increasing and the tasks for machine operators are growing. In addition, construction projects, such as excavating a trench or complete earthworks and civil engineering projects must be implemented quickly and cost-effectively.
Productivity
The operator can only visually estimate the excavation depth. Additional control measurements are required after each step leading to increased re-work.
Machine Wear
Additional re-work results in more operating hours for your machine which in turn increases machine wear and requires earlier replacement.
Operating Costs
Inefficient, uncontrolled levelling requires more passes, increases working hours and fuel consumption.
Solutions
01
Add-on GPS LevelLing system for Graders, dozers or Blades
MOBA 3D-matic
3D-matic’s strength lies in its simple and user-friendly way of creating 3D models in the field. It understands how to make the complexity of 3D models easy to understand and at the same time is packaged in a user-friendly design. Knowing exact levels without manual control and measurement speeds up your project completion many times over. In addition to considerable time and fuel savings, you also increase occupational safety on the construction site, as the machine operator no longer has to leave the cab.
3D-matic System Components
Operating Panel
While the rugged 7“ touchscreen color display is optimized for use in harsh conditions, the software was developed specifically to be user-friendly.
Controller
Processes all measured values from the sensors in real time.
GNSS Antenna
For exact positioning of the machine.
Total Station
Measures the 3-dimensional position of the machine.
Prism
Reflects the beam of the total station.
02
High-end GPS machine control for optimum earthworks
Xsite PRO 3D
The Xsite® PRO 3D machine control system makes working with a dozer more effective and reduces your surveying, material and fuel costs. Your GPS control system guides you to set structural layers to the right elevation in one go. The large and clear touch screen and illustrative graphics enable the operator to for example easily monitor the difference in the elevation of the blade and the target surface. With the help of the machine control system the operator will find it easy to tackle any task. Special attention has been paid to designing the various Xsite® PRO 3D functions as easy to use as possible. Storing as-built data and selecting a model, for example, can be done by just one touch!
Xsite PRO 3D System components
OPERATING PANEL
Rugged 8.4" colour touch screen display for optimal working experience with Xsite PRO 3D controls.
Controller
Real-time processing of all incoming position data from the connected sensors.
CROSS SLOPE SENSOR
Dynamic detection of the coulter inclination, longitudinal machine inclination and coulter rotation. Operates with a dynamic liquid sensor.
GNSS Receiver
Works accurately with GPS, GLONASS, Beidou and Galileo satellite navigation systems and has 336 channels for multi-constellation GNSS support.
LED Display
Additional LED display for fast detection of current dozer blade position.
GNSS Antenna
Precise location in the terrain with GNSS coordinates. Reduces surveying effort by up to 90% and optimises the user experience.
Controller
Integrated 2D and 3D control, processes and compares all measured values from the connected sensors quickly and accurately.